Qingdao Shendun Waterproof Technology Co.,Ltd
Self-adhesive Waterproof Membrane DS-SA is also named Self-adhesive Polymer Modified Bitumen Waterproof Membrane, its base materials are SBS elastomer, good road Bitumen and tackifier, its upper side is PET Film, PE Film, aluminium foil or silicone coated membrane, its bottom side is silicone coated membrane as ant sticking layer.
1) Self-adhesive, without fire and bonding agent.
2) Excellent binding property.
3) Good tensile strength, puncture resistance and corrosion resistance.
4) Easy, safe and environment friendly.
1) Roof, underground;
2) Swimming pool, fire pool and reservoir;
3) Subways or tunnels;
4) Construction areas if open flame is strictly prohibited;
5) Cold construction areas.
1) Do not operate when rain, snow, strong wind.
2) Use hot air gun if it is below 5℃.
3) Train before operation.
Storage and Transportation:
1) Package in plastic bag.
2) Separate storage for different models.
3) Avoid direct sunshine, rain, keep ventilated.
4) Temperature should be below 45℃.
5) Do not piled more than 5 floors together if horizontal, 1 floor if stand.
Thickness: 1mm, 1.2mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm
Width: 1m or be cut into smaller width
Length: 10m, 15m, 20m, 25m
Copyright © Qingdao Shendun Waterproof Technology Co.,Ltd All Rights Reserved.